Vertical Sliding Windows

The vertical sliding sash range combines the elegance of traditional sash windows with the enhanced performance benefits and structural integrity of modern materials requiring minimal maintenance.

Request A Call Back

10 + 10 =

Whether replacing existing timber sliding sash in period buildings or adding character to any new development, they come complete with an easy clean facility for practicality as well as performance and aesthetics.


  • Manufactured from fully featured suite in white and foil finishes
  • Internally glazed, multi-chambered
  • Central catch with additional corner sash locking
  • High performance weather pile sealing
  • Aluminium reinforcement
  • 24mm Low-line glazing bead
  • Tilt restrictor and easy clean facility

A comprehensive range of Featured Ancillaries to cover all building applications

Product Options

Travel Restrictors
A shark fin device used to restrict the opening of the sash to 100mm, to meet current building regulations. Available in white, chrome and gold.

Sash Stops
A section of profile that sits on the top of the inside and bottom of the outside frame to restrict the sash from opening fully. The restriction is normally set to between 100mm and 200mm. Also known as limit stops or a frame stop.

Decorative Horns
Placed on the outside of the sash as an original feature. They are not fitted as standard and therefore must be specified with your order/quote. Available in white, cream and tan.

Astragal Bars
Decorative sculptured bars that give the sash the illusion it has individual panes of glass. These are positioned on both the inside and outside of the glass with a duplex spacer bar in the sealed unit.

Georgian Bars
Internal decorative bars that create a georgian effect. Available in widths of 18mm and 25mm.

Cill Horns
An extended piece of cill at either end of the window.

Sash Lifts
An ‘r’ shaped handle positioned internally at the bottom of the sash to lift the window up. These are fitted as standard and are available in white, chrome and gold.

D Handles
An alternative to sash lifts, positioned internally to lift the window up. A single D handle can also be fitted to the outside sash to assist opening and closing. These are not fitted as standard. Available in white, chrome and gold.

Pole Eyes
Fitted on the inside of the top sash to assist with opening and closing. Also known as finger pulls, they are fitted as standard and are available in white, chrome and gold.

Tilt Knobs
Sliding decorative knobs used to open and tilt the sashes. Fitted as standard on all our frames and are available in white, chrome and gold.

Tilt Restrictors
These bars allow the window to be tilted inwards for easy cleaning and ventilation. Fitted as standard on all our windows.

Trickle Vents
Predominantly placed in the top sash but can be placed in the head upon request. If the trickle vent is placed in the head of the window, a 20mm addon to the head must be specified at an additional cost. Trickle vents are not fitted as standard. Available in white, brown and tan.

Please note, trickle vents cannot be placed on windows below 600mm.


Our colour range is available in a wide range of woodgrain and coloured finishes to perfectly complement your home.
With these realistic woodgrains ranging from contempary Golden Oak to dramatic rosewood.

Life is too short to paint your rotten old timber windows with our range of colours all you need is a quick wipe!

These are also available in dual colour so you can have the bright white on the inside and a dark rosewood on the outside!


The colours shown give an indication only. No guarantee can be given that they will exactly match existing products. Additional colours are available to order as specials.


Tel: 01934 613513    fb